IP08 vs IPX4
Head-to-head comparison of two IEC 60529 ingress protection ratings.
IP08 and IPX4 are both IEC 60529 ingress protection codes, but they differ in liquid protection (level 8 vs 4). IP08 is rated for no protection and continuous immersion (manufacturer-specified), while IPX4 provides no protection and splashing water (all directions).
Built to withstand no protection against solid objects and protection against the effects of continuous immersion in water under conditions specified by the manufacturer.. Classified as IEC 60529 ingress protection code IP08, it pairs solid level 0 with liquid level 8.
IPX4 (solid protection not specified) resists splashing water from any direction. A common minimum for bathroom and outdoor-covered appliances where dust sealing is not required.
Detailed comparison
The stronger rating on each row is highlighted in emerald.
Solid protection (first digit)
IP08
0 — No Protection
IPX4
0 — No Protection
Liquid protection (second digit)
IP08
8 — Continuous Immersion (manufacturer-specified)
IPX4
4 — Splashing Water (all directions)
Dust-tight
IP08
No
IPX4
No
Water-jet resistant
IP08
Yes
IPX4
No
Submersible
IP08
Yes
IPX4
No
Outdoor suitable
IP08
Yes
IPX4
Yes
The exact difference (IP08 vs IPX4)
Solid protection
IP08
Level 0 — No Protection
IPX4
Level 0 — No Protection
Both IP08 and IPX4 share the same solid protection: No Protection.
Liquid protection
IP08
Level 8 — Continuous Immersion (manufacturer-specified)
IPX4
Level 4 — Splashing Water (all directions)
IP08 handles Specified by manufacturer (Continuous Immersion (manufacturer-specified)), while IPX4 handles 50–100 kPa (Splashing Water (all directions)). IP08 provides 4 levels more liquid protection.
NEMA equivalents
No direct NEMA equivalent.
No direct NEMA equivalent.
Recommendation
IP08 offers higher overall protection than IPX4. Choose IP08 for harsher environments; IPX4 may suffice for milder conditions and can be more cost-effective.