Consumer Electronics

IP00 offers no protection against solid objects or moisture. It is suitable only for indoor, climate-controlled environments where the equipment is fully enclosed within another protective housing.

IP20 protects against contact with a finger and solid objects larger than 12.5 mm. It has no water protection and is intended for dry, indoor use such as consumer electronics and IT equipment.

IP22 protects against fingers and 12.5 mm objects, plus vertically dripping water when tilted up to 15°. Common for indoor equipment that may encounter occasional condensation or drips.

IP44 protects against small solid objects (1 mm) and splashing water from any direction. It is the common minimum rating for outdoor-covered fixtures and bathroom zone equipment.

IP57 is dust-protected and tolerates temporary immersion up to 1 m for 30 minutes. Useful for portable devices that may be dropped in shallow water.

IP67 is dust-tight and withstands temporary immersion in water up to 1 meter for 30 minutes. The go-to rating for outdoor and rugged devices that may be briefly submerged.

IPX4 (solid protection not specified) resists splashing water from any direction. A common minimum for bathroom and outdoor-covered appliances where dust sealing is not required.

IPX5 resists low-pressure water jets (6.3 mm nozzle, 30 kPa) with solid protection not specified. Used where water-jet resistance matters more than dust sealing.

IPX7 resists temporary immersion up to 1 meter for 30 minutes, with solid protection not specified. Common for portable electronics that may be dropped in water.

IPX8 protects against continuous immersion under manufacturer-specified conditions (depth and duration), with solid protection not specified. The standard for submersible consumer electronics.

IP01 provides no protection against solid objects and protection against vertically falling drops of water. Dripping water shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 0 with second-digit (liquid) level 1.

The IP04 rating offers no protection against solid objects and protection against splashing water. Water splashed against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 0 with second-digit (liquid) level 4.

IP10 provides protection against solid objects larger than 50 mm and no protection against water. It is an IEC 60529 ingress protection code combining first-digit (solid) level 1 with second-digit (liquid) level 0.

Engineered to deliver protection against solid objects larger than 50 mm and protection against vertically falling drops of water. Dripping water shall have no harmful effects.. Classified as IEC 60529 ingress protection code IP11, it pairs solid level 1 with liquid level 1.

Under IEC 60529, IP14 specifies protection against solid objects larger than 50 mm and protection against splashing water. Water splashed against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 1 with second-digit (liquid) level 4.

Designed for environments requiring protection against solid objects larger than 12.5 mm and protection against vertically falling drops of water. Dripping water shall have no harmful effects., IP21 is an IEC 60529 code combining solid level 2 with liquid level 1.

With IP24, an enclosure receives protection against solid objects larger than 12.5 mm and protection against splashing water. Water splashed against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 2 with second-digit (liquid) level 4.

The IP31 rating offers protection against solid objects larger than 2.5 mm and protection against vertically falling drops of water. Dripping water shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 3 with second-digit (liquid) level 1.

IP34 is an ingress protection code that ensures protection against solid objects larger than 2.5 mm and protection against splashing water. Water splashed against the enclosure from any direction shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 3 with second-digit (liquid) level 4.

Under IEC 60529, IP41 specifies protection against solid objects larger than 1.0 mm and protection against vertically falling drops of water. Dripping water shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 4 with second-digit (liquid) level 1.

Under IEC 60529, IP50 specifies dust-protected (limited ingress, no harmful deposit) and no protection against water. It is an IEC 60529 ingress protection code combining first-digit (solid) level 5 with second-digit (liquid) level 0.

With IP51, an enclosure receives dust-protected (limited ingress, no harmful deposit) and protection against vertically falling drops of water. Dripping water shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 5 with second-digit (liquid) level 1.

IP61 is an ingress protection code that ensures dust-tight (no ingress of dust) and protection against vertically falling drops of water. Dripping water shall have no harmful effects.. It is an IEC 60529 ingress protection code combining first-digit (solid) level 6 with second-digit (liquid) level 1.